真空隔热波纹管
发布：欧米茄不锈钢软管 | 发布时间：2020/4/1 16:11:12
Summarize 概述
Through careful design, strict manufacture and reasonable connection,the high vacuum insulated cryogenic liquid transmission pipeline produced by OBB® can minimize the cold loss, and the cryogenic liquid can pass through at-196 C without frost for 24 hours.
OBB® 生产的高真空隔热低温液体输送管道通过精心设计，严格制造，合理链接，达到把冷损降到极低，低温液体在-196°C通过24小时不结霜。
Product features 产品特点
1. Double-layer stainless steel metal hose is adopted, and special multi-layer thermal insulation composite material is added in the interlayer and kept in high vacuum state.
2, the bending radius is small, the use is convenient, and the length can be determined according to the requirements of users.
3. It can be connected with vacuum pipeline.
4. Both ends of the vacuum hose are equipped with special quick connectors for storage tank and tank car, which can greatly reduce the evaporation loss of liquid in the charging and discharging liquid of tank car.
1、采用双层不锈钢金属软管，夹层中添加专用多层绝热复合材料并保持高真空状态。
2、弯曲半径小，使用方便，长度可根据用户要求而定。
3、可与真空管道连接。
4、真空软管两端配以贮槽和槽车专用快速接头，可大量减小槽车充排液体中的液体汽化损失。
Main purpose 主要用途
Products are suitable for transporting LNG, liquid nitrogen, liquid argon, liquid oxygen, etc. Widely used in LNG automobile
filling stations, steel mills, metallurgy, chemical industry, food, large-scale air separation liquid transportation, natural gas
engineering, etc.
产品适用于输送LNG、液氮、液氩、液氧等。广泛应用于LNG汽车加气站、钢厂、冶金、化工、食品、大型空分液体输送、天然气工程等。
Threads with PT or NPT
牙口可选用PT或NPT规格
The flange conforms to JIS, ANSI, DIN and B.S
standard specifications
法兰符合JIS,ANSI,DIN,B.S标准规格
The length of flexible hose shall be calculated by
the length that includes the nipple
软管长度之计算皆以含尼普之长算度为计算标准
Please tell us the size, length, service pressure and
joint type when ordering
订购时请示知尺寸，长度，使用压力及接头型式
This list is only a brief introduction. Hoses and joints
of various sizes can be supplied as required
本单仅做简单介绍，各种尺寸的软管及接头型式可依要求供应
